Scuba Diving Accessories

Lightweight and flexible low pressure hoses. Multi-layer construction Excellent resistance to abrasion. Kink-resistant design Approved for use for...

6 ft (183 cm) length/large 12 in (30.5 cm) circumference Lower pocket includes a spool with 100 ft (30 m) of line Spool line is attached to D-ring...

Designed to fit the curve of a forearm Three separate writing surfaces with two fold up leafs Carbon stick pencil Dimensions 4.25" wide x 4.0" tal...

The smooth outer surface prevents abrasion around the neck Less flexibility and negative buoyancy allow the longer hoses to stay in place Outer ...

Spools are injection-molded with glass-filled nylon 24 hi-viz yellow nylon 16 strand line Line breaking strength of 125-130 lbs (56-59 kg) 4” stai...

6’ (183 cm) length / Large 12” (30.5 cm) circumference Lower pocket accommodates a lead weight or finger spool Open bottom with anti-spill baffle ...

50 lbs. of positive lift. Anti-spill bottom with baffle to allow easy fill from any second stage Combination oral and BC QD inflator. Remains infl...

Add a quick-disconnect to most regulators or full face mask Installs between low pressure regulator hose and second stage Click & Lock to prev...

Not all rubber hoses are created equal. Go with the quality difference and choose XS Scuba rubber hoses. Our hoses are designated with our logo on...

Stainless steel frame. #24 hi-viz yellow nylon 16 strand line Breaking strength is 175 lbs (80 kg) 4” stainless steel double-ender bolt snap with ...

2-way swivel Delrin and stainless steel construction Retains two standard diameter - Standard hose diameter is 0.4" (11 mm) to 0.5" (13 mm). low o...

Solid, one-piece, anodized aluminum handle Spool lock can mount on either end for left or right-handed use Spool is machined from Delrin, will not...

Flared edges are easier to grip and keep fingers out of the way Large center hole fits gloved thumb 304 stainless steel with anodized surface #24 ...

XS Scuba Front Cover

XS Scuba SeaAir Front Cover XS Scuba SeaAir Front Cover

The smooth outer surface prevents abrasion around the neck. Less flexibility and negative buoyancy allow the longer hoses to stay in place. Outer ...

Fits inflators with standard male QD nipple Fill about half way with fresh water to fully rinse inside Give the BC a good shaking. Invert the BC, ...

Required swivel between HP hose and SPG Brass construction Required swivel between HP hose and SPG. Brass construction.

Remove and replace the most common scuba hoses 1/2”, 9/16”, 5/8” & 11/16” wrenches. Most common hex wrenches 5/32”, 3/16” & 1/4” Valve han...

Add a quick-disconnect to most regulators or full face mask Installs between low pressure regulator hose and second stage Chromed brass constructi...

Convert Standard Regulator Low Pressure Hose to Low Pressure EZ QD Hose Easy to install. EZ attach BC and dry suit QD hoses Easy to disconnect wit...